PCB Repair

                                                                                                          osc1

                    Arcade Services specializes in surface mount printed circuit board repair on all Atari and Midway PCBs.

BACKGROUND

My background is from Midway Manufacturing as a PCB technician. Shortly after I started my business I also provided technical service for Taito of America until they closed in the USA.

 We have been in business for over 25 years and at the same location since about 1991.

*Fast Turnaround Time!*

WHAT WE REPAIR

We also repair Buck Hunter and Golden Tee PCBs 2001 through 2005 including Golden Tee Complete.

All Vegas board set. War, all Blitz /Showtime combos, Gauntlet Legends, Legacy

Rush 2049, Rush 2049 SE

Road Burners

Cart Fury

Area 51

Area 51 Maximum Force

Maximum Force

All Seattle boards

San Francisco Rush

Rush the Rock

Rush force feedback PCBs

Cruis’n USA

Cruis’n World

Cruis’n Exotica

Arctic Thunder Computers

Hydro and Off Road Computers

Incredible Technologies 2001 through 2006 Buck hunter and Golden Tee

Many more so if you do not see your PCB then just ask!

 

BELOW IS THE INFORMATION YOU NEED IN ORDER TO GET AN RMA NUMBER

You must email us with “ALL” the information below:

 

* Please specify if you are a home owner or amusement vender by stating non operator or operator

Full name

Shipping address (commercial or residential)

Phone (cell if you have one) contact phone number

  The name of the PCB or PCBs that your sending in and the symptom 

 

Please keep in mind that this will be a permanent RMA # so in the future all you have to do is attach this number when you send anything in for repair

I will respond back with your RMA #

PAYMENTS ACCEPTED

We accept all major credit cards except (American Express) and Paypal as payments  (NO COD SHIPPING)

WHERE TO SHIP YOUR PCB

Arcade Services

2188 E 900 S

Markleville, Indiana 46056

317.547.7041

Thank you!

 WHAT WE CHARGE

We charge $40.00 to bench a PCB. Let me explain what that means.

 When we put a PCB on the bench we troubleshoot the PCB with an oscilloscope to determine if the board can be repaired as sometimes due to obsolete parts, corrosion, or custom applications the board cannot be repaired which is very seldom.

If the obsolete part is out there to be had we will find it!

IT DOES TAKE TIME TO TROUBLESHOOT!

 

 The $40.00 applies towards the repair charge which is $75.00 an hour and in most cases it only takes an hour to repair and sometimes an hour and a half.